Current Category
Frame Clamps

Frame Clamps for picture framing.

FrameCo Strap Clamp 5m - 16'		QTY:
	Code #10106 The ideal framing clamp. The FrameCo Strap Clamp 5M - 16' holds frames up to 1.25 x 1.25M (4') square. The metal strap enables you to achieve maximum hold but doesn't damage the corners of the moulding due to the special flexible,  plastic corner pieces. Clamping is a most important part of the frame joining procedure. If you hold the frame securely then v-nailing will give you a tight secure joint. Features exclusive corner "wings" to prevent the clamp slipping. Four corner clamping allows for better control. Metal strap clamp for stronger holding power. Metal strap folds easily into holder. Flexible corner pieces will not damage outside of frame. Lays flat on the table for easy v-nailing. See "Framing Kits" for Special Discount Prices. How to Use Instructions - Click Here (pdf file)

FrameCo Strap Clamp 9m - 29'		QTY:
	Code #10107 The ideal framing clamp. The FrameCo Strap Clamp 9M - 29' will clamp larger frames with sufficient holding power ready for v-nailing. Holds frames up to 2.25M square (7') , or about a door frame size!! Features exclusive corner "wings" to prevent the clamp slipping. Four corner clamping allows for better control. Metal strap clamp for stronger holding power. Metal strap folds easily into holder. Flexible corner pieces will not damage outside of frame. Lays flat on the table for easy v-nailing. How to Use Instructions - Click Here (pdf file)

5 Metre Strap Only (16')		QTY:
	Code #10108 Replacement Steel Strap to suit the 5M FrameCo Strap Clamp (16').

9 Metre Strap Only (29')		QTY:
	Code #10109 Steel Strap to suit the FrameCo Strap Clamp. Can be fitted easily to the Clamp body making it an ideal spare for clamping larger frames. Our suggestion is to purchase a 5M Strap Clamp complete and a (29') 9M strap only...if you wish to join a larger frame, then simply exchange the straps.

FrameCo Corner Clamp I		QTY:
	Code #10110 The FrameCo Corner Clamp is a powerful single corner clamp suitable for large mouldings, complex shaped profiles or repairs to old frames. Clamps mouldings up to 3" wide.   The Corner Clamp will clamp only one corner at a time. Our suggestion is to start with the metal Strap Clamp....you are clamping four corners at the same time.....you can see the result of your cutting before joining commences, and the frame is only turned once for joining. Corner clamps can exert greater pressure on a joint, but it is only one corner per time. How to Use Instructions - Click Here (pdf file)

FrameCo Corner Clamp II		QTY:
	Code #10104 The FrameCo Corner Clamp is a powerful single corner clamp suitable for larger mouldings, repair work to old frames. Clamps mouldings from 2-6” wide. How to Use Instructions - Click Here (pdf file)

FrameCo Cord Clamp		QTY:
	Code #10130 The FrameCo Cord Clamp is an economical clamp ideal for the home framer or beginner. Clamps four corners at one time, but it is best to allow the glue applied to the corners of the frame to dry before joining starts. The reason for this is that the cord clamp cannot apply the same holding power to a corner as the Metal Strap Clamp or Corner Clamp.  Features exclusive corner "wings" to prevent the clamp slipping. Clamps frames up to 16" x 24"(40 x 60 cm). Used in conjunction with a glued joint. Ideal clamp for the beginner. See "Framing Kits" for Special Discount Prices. How to Use Instructions - Click Here (pdf file)

Corner Wing Set x 4		QTY:
	Code #10105 Replacement set of 4 FrameCo plastic corners for strap, cord, and Hobbi-Clamps. FrameCo's exclusive "wings" on the corner pieces locks into each corner piece. This prevents any lateral movement. Great for narrow or small frame mouldings. How to Use Instructions - Click Here (pdf file)