|
|
Current Category
Accessories > D-Rings, Screw Eyes
|
1 Hole Nickel D-Ring x 50/Pk
|
|
 |
Code #20015
D-Rings are screwed into the rear of the frame – lie flat against the frame, so appear to look better than screw eyes.
|
|
1 Hole Nickel D-Ring x 100/Pk
|
|
 |
Code #20014
D-Rings are screwed into the rear of the frame – lie flat against the frame, so appear to look better than screw eyes.
|
|
2 Hole Plate D-Ring x 10/Pk
|
|
 |
Code #20021
A Heavy Duty robust D-Ring with the holes spread across the body rather than down the body as in strap hangers. Use on wide mouldings. The metal ring is also is fully crimped inside the housing for added strength. Brass finish.
|
|
2 Hole Plate D-Ring x 20/Pk
|
|
 |
Code #20022
A Heavy Duty robust D-Ring with the holes spread across the body rather than down the body as in strap hangers. Use on wide mouldings. The metal ring is also is fully crimped inside the housing for added strength. Brass finish.
|
|
1 Hole H/Duty D-Ring x 10/Pk
|
|
 |
Code #20023
The wire is curled inwards at the top so that it will not pull out from the metal body. Ideal for heavy pictures such as mirrors or large pictures. The Hanger can have 1, 2 or 3 screw holes in the body for additional holding power. Zinc or silver finish.
|
|
1 Hole H/Duty D-Ring x 20/Pk
|
|
 |
Code #20024
The wire is curled inwards at the top so that it will not pull out from the metal body. Ideal for heavy pictures such as mirrors or large pictures. The Hanger can have 1, 2 or 3 screw holes in the body for additional holding power. Zinc or silver finish.
|
|
2 Hole H/Duty D-Ring x 10/Pk
|
|
 |
Code #20030
The wire is curled inwards at the top so that it will not pull out from the metal body. Ideal for heavy pictures such as mirrors or large pictures. The Hanger can have 1, 2 or 3 screw holes in the body for additional holding power. Zinc or silver finish.
|
|
2 Hole H/Duty D-Ring x 20/Pk
|
|
 |
Code #20031
The wire is curled inwards at the top so that it will not pull out from the metal body. Ideal for heavy pictures such as mirrors or large pictures. The Hanger can have 1, 2 or 3 screw holes in the body for additional holding power. Zinc or silver finish.
|
|
3 Hole H/Duty D-Ring x 10/Pk
|
|
 |
Code #20033
The wire is curled inwards at the top so that it will not pull out from the metal body. Ideal for heavy pictures such as mirrors or large pictures. The Hanger can have 1, 2 or 3 screw holes in the body for additional holding power. Zinc or silver finish.
|
|
Screw Eyes x 50/Pk
|
|
 |
Code #20501
A special shaped screw eye made by FrameCo to fit into the end of the PushMaster. To hang pictures you can use screw eyes or D-Rings…and most people prefer D-Rings, because they lie flat against the frame back. But really the frame still hangers at the same angle, and about the same distance from the wall no matter what hanger you use. If you are an artist, use D-Rings, as screw eyes damage other frames when stored together.
|
|
Screw Eyes x 100/Pk
|
|
 |
Code #20505
A special shaped screw eye made by FrameCo to fit into the end of the PushMaster. To hang pictures you can use screw eyes or D-Rings…and most people prefer D-Rings, because they lie flat against the frame back. But really the frame still hangers at the same angle, and about the same distance from the wall no matter what hanger you use. If you are an artist, use D-Rings, as screw eyes damage other frames when stored together.
|
|
