Current Category
Mat Cutting > Blades

Blades to suit MatMaster Cutters, Coin cutter, GrooveMaster, trimming knife and oval cutter.

Mat Master™ Blades x 10/Pk		QTY:
	Code #14250 Mat Master replacement blades especially for FrameCo's range of Mat Master tools. Thicker than standard blades to prevent hooking at the corners when cutting bevel mats.

Mat Master™ Blades x 50/Pk		QTY:
	Code #14252 Mat Master replacement blades especially for FrameCo's range of Mat Master tools. Thicker than standard blades to prevent hooking at the corners when cutting bevel mats.

Mat Master™ Blades x 100/Pk		QTY:
	Code #14253 Mat Master replacement blades especially for FrameCo's range of Mat Master tools. Thicker than standard blades to prevent hooking at the corners when cutting bevel mats.

Mat Master™ Deep Cut Blades x 10/Pk		QTY:
	Code #14245 The standard #201 blades cut bevel mat board 2.2mm thick. As most mat boards on the world market are only 1.7mm thick this blade is quite sufficient. To achieve the long, deep bevel cuts required for wrapped mats, the base mat needs to be 3mm to 5mm thick. Our new Deep Cut Blades will cut a crisp, clean bevel in 3mm or 5mm fome board. How to Use Instructions - Click Here (pdf file)

Mat Master™ Deep Cut Blades x 50/Pk		QTY:
	Code #14246 The standard #201 blades cut bevel mat board 2.2mm thick. As most mat boards on the world market are only 1.7mm thick this blade is quite sufficient. To achieve the long, deep bevel cuts required for wrapped mats, the base mat needs to be 3mm to 5mm thick. Our new Deep Cut Blades will cut a crisp, clean bevel in 3mm or 5mm fome board. How to Use Instructions - Click Here (pdf file)

Mat Master™ Deep Cut Blades x 100/Pk		QTY:
	Code #14247 The standard #201 blades cut bevel mat board 2.2mm thick. As most mat boards on the world market are only 1.7mm thick this blade is quite sufficient. To achieve the long, deep bevel cuts required for wrapped mats, the base mat needs to be 3mm to 5mm thick. Our new Deep Cut Blades will cut a crisp, clean bevel in 3mm or 5mm fome board. How to Use Instructions - Click Here (pdf file)

GrooveMaster™ Blades x 10/Pk		QTY:
	Code #14404 Short, oblique shaped blades for the GrooveMaster V-Groove and Freestyle Cutter.

GrooveMaster™ Blades x 50/Pk		QTY:
	Code #14405 Short, oblique shaped blades for the GrooveMaster V-Groove and Freestyle Cutter.

GrooveMaster™ Blades x 100/Pk		QTY:
	Code #14406 Short, oblique shaped blades for the GrooveMaster V-Groove and Freestyle Cutter.

Coin Cutter Blades x 10/Pk		QTY:
	Code #14512 Long oblique shaped blades to the suit Coin Cutter.

Trimming Knife Blades x 10/Pk		QTY:
	Code #14426 Blades to suit Trimming Knife.

Logan Oval Cutter Blades x 5/Pk		QTY:
	Code #14504 Logan Blades to suit Logan Oval Cutter.

Logan #270 Blades x 10/Pk		QTY:
	Code #23301 Logan replacement blades especially for Logan range of mat cutter tools.