|
|
Current Category
Frame Clamps
Frame Clamps for picture framing.
|
FrameCo Strap Clamp 5m - 16'
|
|
 |
Code #10106
The ideal framing clamp. The FrameCo Strap Clamp 5M - 16' holds frames up to 1.25 x 1.25M square. The metal strap enables you to achieve maximum hold but doesn't damage the corners of the moulding due to the special flexible, plastic corner pieces. Clamping is a most important part of the frame joining procedure. If you hold the frame securely then v-nailing will give you a tight secure joint.
- Features exclusive corner "wings" to prevent the clamp slipping.
- Four corner clamping allows for better control.
- Metal strap clamp for stronger holding power.
- Metal strap folds easily into holder.
- Flexible corner pieces will not damage outside of frame.
- Lays flat on the table for easy v-nailing.
See "Framing Kits" for Special Discount Prices.
How to Use Instructions - Click Here (pdf file)
|
|
FrameCo Strap Clamp 9m - 29'
|
|
 |
Code #10107
The ideal framing clamp. The FrameCo Strap Clamp 9M - 29' will clamp larger frames with sufficient holding power ready for v-nailing. Holds frames up to 2.25M square, or about a door frame size!!
- Features exclusive corner "wings" to prevent the clamp slipping.
- Four corner clamping allows for better control.
- Metal strap clamp for stronger holding power.
- Metal strap folds easily into holder.
- Flexible corner pieces will not damage outside of frame.
- Lays flat on the table for easy v-nailing.
How to Use Instructions - Click Here (pdf file)
|
|
9 Metre Strap Only
|
|
 |
Code #10109
Steel Strap to suit the FrameCo Strap Clamp. Can be fitted easily to the Clamp body making it an ideal spare for clamping larger frames. Our suggestion is to purchase a 5M Strap Clamp complete and a 9M strap only...if you wish to join a larger frame, then simply exchange the straps.
|
|
FrameCo Corner Clamp I
|
|
 |
Code #10110
The FrameCo Corner Clamp is a powerful single corner clamp suitable for large mouldings, complex shaped profiles or repairs to old frames. Clamps mouldings up to 3" wide.
The Corner Clamp will clamp only one corner at a time. Our suggestion is to start with the metal Strap Clamp....you are clamping four corners at the same time.....you can see the result of your cutting before joining commences, and the frame is only turned once for joining. Corner clamps can exert greater pressure on a joint, but it is only one corner per time.
How to Use Instructions - Click Here (pdf file)
|
|
FrameCo Cord Clamp
|
|
 |
Code #10130
The FrameCo Cord Clamp is an economical clamp ideal for the home framer or beginner. Clamps four corners at one time, but it is best to allow the glue applied to the corners of the frame to dry before joining starts. The reason for this is that the cord clamp cannot apply the same holding power to a corner as the Metal Strap Clamp or Corner Clamp.
- Features exclusive corner "wings" to prevent the clamp slipping.
- Clamps frames up to 40 x 60 cm.
- Used in conjunction with a glued joint.
- Ideal clamp for the beginner.
-See "Framing Kits" for Special Discount Prices.
How to Use Instructions - Click Here (pdf file)
|
|
FrameCo Hobbi Clamp
|
|
 |
Code #10131
The FrameCo Hobbi-Clamp improves the clamping pressure of the cord clamp by removing the stretch from the cord. It is an improved cord clamping unit. Ideal for larger frames than what the cord clamp would hold, but not as secure as the metal Strap Clamp.
- Features exclusive corner "wings" to prevent the clamp slipping.
- Clamps frames up to 70 x 90 cm.
- Used in conjunction with a glued joint
- Ideal clamp for the beginner.
- Tensioner applies more pressure to the joint.
How to Use Instructions - Click Here (pdf file)
|
|
FrameCo Tensioner
|
|
 |
Code #10132
FrameCo Tensioner attaches to the Cord clamp to improve clamping. Can be used with any brand of cord clamp to improve the clamping pressure.
|
|
